What are the key differences between gas and electric furnaces?

If you need a new heating system in time for winter, you’ve no doubt heard about both gas and electric furnaces. While many homeowners have their preference between the two, both furnace types have their strengths. In this article, we’ll review what gas and electric furnaces are, how they work, and what makes them different from one another.

Ready to upgrade to a new heating system? Here in Buffalo and Western New York, Reimer Home Services is your best choice for new system installation. For a free in-home estimate on a new gas or electric furnace, call us—and be sure to ask about our financing, available with approved credit.

A gas furnace combusts either natural gas or propane to generate heating for your home.

Get to know: gas furnaces

Gas furnaces use one of two forms of fuel: natural gas or propane. An obvious prerequisite for owning a gas furnace is having a gas connection at your home.

These furnaces feed either type of fuel into a combustion chamber, where it is ignited, generating heat energy. This heat energy is transferred to your home’s air by way of the heat exchanger—a critical component separating the internal combustion chamber from the outside air. The blower pushes the now-heated air through the air ducts of your home, gradually heating each room to the temperature you set the thermostat at.

As with all heating systems, all gas furnaces have an Annual Fuel Utilization Efficiency (AFUE) score assigned to them. This score is the ratio of heat produced to fuel consumed in its production. The baseline for all home furnaces is 80%, but many of the most advanced gas furnaces on the market today can get up to 97 or 98% AFUE.

What are the benefits of a gas furnace?

There are several upsides to installing a new gas furnace in your home:

  • Less impacted by power outages: If the power goes out during a blizzard, most gas furnaces can continue to heat your home and protect your pipes, all without the need for a heavy-duty backup generator.
  • Cost-effective: Since gas is often cheaper than electricity, you’ll save money on your energy bills.
  • Environmentally friendly: Natural gas furnaces reduce the burden on local utility companies to provide electricity, which is often produced by oil or coal-fired power plants.

It should be noted that the gas furnaces manufactured today are built with safety sensors and mechanisms designed to keep the combustion process consistent and safe. However, one of the potential downsides of a gas furnace is the possible risk of a fault with the heat exchanger, which could allow gas to enter the air of the home.

At Reimer, we recommend you always have an experienced professional install and service your furnace, and you call our team if you notice any performance or efficiency issues with your system.

Get to know: electric furnaces

Electric furnaces draw on the electricity used by every other appliance in your home. Electricity is run through heating elements, heating them up. A blower pushes cold air past these superheated elements, heating the air before further pushing it through ducts to the living spaces of your home. If you have an electric space heater, the concept should be familiar: in many ways, an electric furnace is a whole-home space heater!

As with gas furnaces, electric furnaces have a government-mandated AFUE floor of 80%. However, many models can approach 96 or 97% AFUE, putting their efficiency on par with gas furnaces.

What are the benefits of an electric furnace?

There are many reasons that an electric furnace might be the right fit for your home:

  • No need for a gas connection: Electric furnaces can provide reliable heating to your home without the need for a pre-existing gas line connection.
  • Lifespan: Most electric furnaces last longer than their gas counterparts, which means you might not need to replace the system as soon as with a gas furnace.
  • Costs: While exact prices can vary between models, many electric furnaces are less expensive upfront than their gas counterparts with similar AFUE ratings and features.

Which type of furnace is right for your home?

On this front, there’s no right answer. Every home is different, and heating needs, energy efficiency, and more can vary from home-to-home here in Buffalo and Western New York. There are also other heating options—such as ductless systems—to consider.

If you need a new heating system, we recommend calling us here at Reimer Home Services. We provide free in-home estimates on new heating systems, and our techs can match you to the right gas or electric furnace for both your home and your family’s comfort needs.

What are the signs your water heater needs to be replaced?

Most homeowners don’t give their water heater that much thought—until something goes wrong. However, most water heaters exhibit warning signs of needing to be replaced long before a major leak or tank burst occurs. In this article, we’ll review several of the signs your water heater needs to be replaced, from old age to visible tank damage.

Your water heater is more than a decade old

Most standard water heaters need to be replaced after 10-12 years of serving your home. With some preventative maintenance—such as flushing the water heater annually and replacing the anode rod midway through the lifespan of the system—your water heater may live longer than that. But, generally speaking, after a decade, you should at least be prepared for the potential of replacing your water heater.

But, what should you be on the lookout for when it comes to your water heater? Here are just a few signs that it might need to be replaced—and soon.

Your home isn’t getting enough hot water

As water heaters age, mineral scaling typically builds up at the bottom of the tank, covering the heating element. For homeowners who do not annually flush their system, this problem often occurs earlier than for homeowners who care for the water heater tank. This results in the water not being heated as efficiently or as effectively as it once was. The end result is a water heater that costs more to operate but provides your home with less hot water than ever before.

The first sign of this occurring, typically, is your home starting to run out of hot water on busy mornings when everyone is showering and getting ready for the day. If you have an older water heater when this starts to happen, it’s a good sign you need to call the plumbers at Reimer out to take a look at your system.

Your water heater is no longer working efficiently

Another sign that your water heater is nearing the end of its life are higher-than-usual energy bills. Whether you have a gas or electric water heater, keep an eye on how much you’re spending on energy every single month. As water heaters experience scale buildup, they also typically become less efficient.

You notice cracks or leaks in the tank

The sacrificial anode rod in your home’s water heater is designed to attract corrosion away from the tank walls, protecting them from rust and scale damage. However, after the anode rod has been spent, that corrosion will go after the tank itself. Your water heater is pressurized, so the first sign that something is wrong will typically manifest in the form of small cracks in the exterior shell. These form as the water heater tank expands slightly due to the pressure. Significant enough cracks will also allow some degree of water to escape, which will appear as water on the ground or in the drainage basin of the water heater.

A water heater that is beginning to show signs of stress damage is potentially a disaster waiting to happen. Eventually, if the tank walls weaken enough, they’ll give way, leading to a tank burst as water is allowed to escape from inside the tank. A water heater tank burst is a common cause of flooded garages and homes here in Buffalo and Western New York, which is why it’s important to:

  • Regularly test the pressure-relief valve of your water heater to ensure it’s functioning and preventing excessive water pressure from building inside the tank.
  • Replace a water heater as soon as it shows signs of stress damage or cracks.

Call Reimer for your water heater service and replacement needs here in Buffalo and Western New York

If you’ve observed any of the signs listed above with your older water heater, you need to contact us and have one of our plumbers out to inspect your tank. We’re your local water heater repair, maintenance, and replacement specialists, and our plumbers can give you an honest recommendation on whether or not it’s time to replace your water heater tank, or if the system just needs to be repaired.