The causes of a low toilet water level and how it can be adjusted

The average person flushes their toilet 5 times a day. With a larger family or frequent guests, that number can increase significantly. One toilet flush uses approximately 3.5 gallons of water with every flush. The most-efficient low-flush toilets bring that number down to 1.5 gallons per flush. Still, that’s a lot of water moving through your pipes daily!

However, there’s a trade-off to saving water: you may find that your toilet water level seems a little low. This isn’t a major cause for alarm, but it is something you should know about and know how to take care of. Even the best DIY handyman should leave plumbing issues to the professionals. Before you pick up a wrench or plunger, pick up the phone and call the team at Reimer!

A low toilet water level can often be adjusted with just a screwdriver. However, if you encounter complications, call a Reimer plumber!

A low toilet water level can often be adjusted with just a screwdriver. However, if you encounter complications, call a Reimer plumber!

Many toilets allow for the water level to be adjusted. This all takes place in the tank of your toilet.. Raising or lowering the toilet’s float height will change the water level in your toilet. If your toilet water level is too low, you could face issues with flushing. However, some homeowners prefer a lower water level because it conserves water and saves them money.

To figure out the best water level for your home and how to adjust it, call Reimer or visit our website for more information. Our experienced plumbers can come out and inspect your toilet, raise or lower its water level, and give you tips and tricks for conserving water, avoiding leaks or clogs, and more!

Why your toilet water is low

The most common reason your water level is low is because your fill tube is damaged or broken in some way. This small, flexible plastic hose is the main control of your water level. When it’s damaged, the water shuts off before the tank is properly filled. Additionally, something could be off with the toilet’s float arms or float height.

In a worst-case scenario, the problem may lie within your sewer line or with the toilet bowl itself. Your sewer line vent could be clogged, which requires a professional inspection. Or, the toilet bowl may be cracked, causing water to leak onto the bathroom floor. There are multiple reasons your toilet water level could be low, and before you play detective and try to solve the case yourself, call the reliable plumbers at Reimer to handle the job safely and efficiently.

Other plumbing issues you may encounter

Aside from low water level in your toilet, you may run into these other common plumbing issues. Here are just a couple common complaints and how you can find the solution:

My toilet is constantly running

Are you hearing a running toilet, day and night? You’ll be able to hear the water moving in the tank, and it will sound like the toilet bowl is never fully full or finished flushing. There are many reasons why your toilet won’t stop running, including a crack or damage to the toilet flapper, a fill valve issue, a water level that’s too high, or a faulty fill tube. With so many possibilities, have a professional plumber out to quickly inspect the toilet and find a solution.

My toilet isn’t flushing

Another common bathroom issue is a toilet that just won’t flush. You may have a simple clog that needs to be removed, but the problem could be bigger. Your toilet’s water level could be too low, the flapper could be bent or warped, or the lift chain has become disconnected . Since there are a variety of causes of a toilet that no longer flushes, the best way to find an answer is to call someone who handles these issues on a daily basis. Don’t play hide-and-seek with your toilet issues—call in a professional!

Why regular plumbing maintenance matters

Annual plumbing maintenance is always recommended, with more frequent checkups during extreme heat or cold weather. The last thing you want to encounter is frozen pipes or a bathroom flood in the middle of the night. The more often you check-in on your plumbing systems, the smoother these systems will run.

Call Reimer for all your plumbing needs

The team at Reimer Heating, Air Conditioning, & Plumbing can handle all your home needs with a friendly attitude and affordable prices. Don’t sit and struggle alone any longer! We’re the “Wizards of Comfort,” serving Western New York since 1921. Visit our website or call our team today to get started today!

Here’s why upgrading to a smart thermostat is a great investment

With technology changing every day and becoming more and more advanced, automation has become one of the most important aspects of daily modern life. It has changed the way we all work, play, and communicate. It has even quickly become an important part of keeping us comfortable in our homes, and the smart thermostat is to thank for this convenience.

First-generation and mercury-based thermostats are becoming wildly outdated compared to new smart models available on the market. If you are looking to bring your home into the modern age with the best-possible comfort and convenience for your home, here are just a few reasons to consider upgrading your thermostat.

Call Reimer for thermostat installation, repair, and other services here in Buffalo and Western New York.

We can install a programmable, smart thermostat in your home. Call Reimer today!

A smart thermostat allows you to program your indoor temperature for when you’re away, saving you money on your monthly energy bills.

Why upgrade to a smart thermostat?

1. They’re SMART

Before you consider the various perks of installing a new smart thermostat, it’s important to understand what separates them from the other thermostats. The oldest of the bunch—mercury thermostats—use a needle to control temperature. They don’t give the most accurate reading, and they only come with standard heating and cooling settings. About 20 years ago, this was the industry standard for both residential and commercial construction.

The digital thermostat, which is often confused with a smart thermostat because of their similar appearance, allows the user to adjust the temperature depending on a certain time of day. Both of these earlier models are somewhat effective in regulating temperature, but they don’t have the intelligence or flexibility options offered by smart thermostats. Their state-of-the-art features and capabilities are what sets smart thermostats apart. They have the ability to make automatic adjustments based on your home and your cooling and heating needs. The very best models “learn” as they’re used, updating their algorithm to deliver optimal comfort with less energy use..

2. You can remotely change the temperature

If you’ve ever arrived at work and realized you forgot to turn the thermostat to a more energy-efficient setting before you left, you’re not alone. After all, forgetting to do a repetitive task is a very human mistake! And while it’s nice to come home from work to a nice cool and comfortable house, it’s a serious waste of money and energy to run your AC unit at an optimal temperature all day, especially when you’re not there for more than 8 hours.

Smart thermostats solve this issue. Most smart thermostats have Wi-Fi capability, which allows you to set your home’s temperature from anywhere in the world where there is an internet connection. So, the next time you get to work and realize you forgot to set the thermostat before you left, don’t stress. You can change it from your phone app, and know that you won’t have a huge energy bill because of a small mistake.

3. Save money with improved energy efficiency

The top feature of smart thermostats is that they save you money. When you add this to energy-saving HVAC systems, your savings will just continue to grow. Because the smart thermostat can sense when you are not home, or even be set to run at specific times during the day, your AC unit is not working overtime to produce temperatures that you don’t need. Not only will it help you save on your monthly energy bills, but it will also reduce necessary maintenance and repair costs because it is not running as often.

4. Solve outdated thermostat issues

A huge issue with old-school, outdated thermostats is that they can experience a variety of different complications. Things such as poor thermostat placement, dirt and debris buildup, and bad electrical connections are all things that reduce your thermostat’s performance and efficiency. New smart thermostats are more accurate and last longer, which means more consistent temperature in your home and less worry about watching your energy costs.

5. Have greater control over your home

When you pair your smart thermostat with compatible HVAC systems, you will have far greater flexibility. For example, you will have access to zoning, which will allow you to set specific temperatures for certain rooms and parts of your home. For example, if your entire family is in the kitchen cooking and eating dinner, your AC doesn’t need to be cooling your bedroom and living room at the same time. You can program your thermostat to a different setting for each room, saving energy and money.

6. Improve your indoor air quality

A smart thermostat can help improve the air quality in your home by letting you know when your filters need to be changed or even when you need to schedule your next maintenance call. Some smart thermostats also include a humidity sensor feature, which helps keep your home at a comfortable, healthy level. You can even sync your smart thermostat with a smart speaker device so it can automatically do things like order your filters for you when it’s time.

Call our team to learn more about your smart thermostat options

There are many benefits of upgrading to a smart thermostat. If you’re interested in getting started, call us today! Our expert technicians will have you up and running so you can enjoy maximum comfort in your home year-round.