Here’s how to prevent your downspouts from clogging

Prevent Downspouts From CloggingMost people tend to overlook the importance of keeping their home’s downspouts cleaned. They are an important component of the house that drains away the rainwater, thereby preventing it from accumulating on the roof.

However, as the water drains through the downspouts, so does debris—including leaves and twigs that can clog the drainpipe. Luckily for you, Reimer offers drain cleaning services in Buffalo and Western New York.

What happens if a drain pipe clogs?

Roofs, especially those with parapet walls, are catchalls for any and all sort of debris, including leaves, twigs, and plastic bags, among others. Drains and debris don’t mix. A drain’s dome lets water flow through while catching debris, which would otherwise clog the plumbing. Unfortunately, this debris builds up around the drain dome, slowing or eventually stopping the water.

Keep in mind that debris and drain is a bad match. If you don’t clean the debris, it will slowly accumulate around the drain dome and slow down or stop the flow of water. A clogged drain pipe can result in accumulation of water over the roof that can cause damage in many ways:

  • As water seeps into the gaps, it can expand and contract due to changing temperature thereby weakening the seams of the roofing material
  • Accumulated water can deteriorate roofing cement, tar, and caulking
  • Build up of water may strain the structural support of the roof due to additional weight
  • Lead to the formation of moss, plants, and slime on the roof deck
  • Create the breeding ground for mosquitoes

So, how can you prevent your home’s downspouts from clogging?  

The answer is simple. You should either regularly check the condition of the downspout yourself, or have the downspouts checked by an experienced plumber. The plumber can inspect the dome of the downspout and clear twigs, leaves, and other debris using proper tools without damaging the assembly or the structure.

Another advice to avoid clogged downspout is to ensure that the correct type, size, and thickness of the drain-dome slot is installed. You must talk with a professional roof drain expert to inquire about the right size and type of downspout for your home. Some of the factors that determine which is the right size downspout for your house include average rainfall exposure and the roof size.

In the end, remember that the best time to inspect and clean the downspout is before the rainiest season of the year. You should have the downspout inspected and cleaned of all debris. Also, after a heavy snowstorm, you should maintain the openings by creating a 12-inch path along the curb for the melting snow.

Call Reimer for drain cleaning of downspouts and other drains

If you to have the downspout checked and cleaned in the area of Buffalo, you can contact Reimer Home Services. You can rest assured that our highly experienced and trained plumbers can expertly perform all kind of plumbing in your home.

The Difference Between Boilers and Furnaces, Explained

Difference between boilers and furnacesHave you ever wondered what the difference between boilers and furnaces are? In this blog post, we’ll compare the two different kinds of heating systems so that you can weigh which is best for your home.

For heating system installation, call the professionals at Reimer.

The majority of homes in the US have a central heating system. But not all types of heating systems are the same. The two most common types of heating systems installed in homes today include the furnace and the boiler. Some people think that the difference between the two is just semantics. However, this is not the case.  Sure, both the systems keep the room warm, but the way that the warm air is generated is different.

Knowing the differences between a boiler and a furnace will be helpful when it comes to new heater installation.  It will also be of use when conversing with the technician about heater problems. So, what are the differences between the two? You should continue reading the article to find out.

What’s the difference between boilers and furnaces?

Boilers generate warm air through the heated water in a tank. They don’t require ducts to circulate warm air throughout the house. Instead, heated water is circulated through pipes to different end points located inside the house that are typically baseboard heaters or radiators.

Electric boilers have heating elements to heat the water, while gas heaters use jets under the tank for the same purpose. The heat is moved through the end points into the living space through radiant heat transfer – the delivery of heat by increasing the surface temperature so that it warms the nearby area.

On the other hand, furnaces use forced-air systems to generate warm air. The forced systems heat the air through a device known as heat exchangers. The heated air is then circulated inside the house through the ducts by blower fans. In electric powered furnaces, heating elements are present that create warm air, while in fuel powered furnaces the warm air is created by the gas jets.

So, which is better?

Each of the types of the heater has its own advantages and disadvantages. Boilers tend to produce cleaner heat and entail lower repair and operation costs. They also tend to be more energy efficient also as you can heat only the areas thereby saving on energy bills. This is a big difference between boilers and furnaces.

However, the problem with boilers is that they take longer to warm the room and can freeze during very low temperature. Also, boilers tend to raise humidity levels inside the house for which you need to install a separate humidifier.

Furnaces, on the other hand, have low installation costs and won’t freeze up during the winter. But they have shorter life span and require frequent repairs. Also, furnace air filter needs to be changed regularly which is not the case with boilers.

Call Reimer for heating installation in Buffalo and Western New York

Whatever heating equipment you purchase, you can ensure that it continues to operate without a major fault for a long time through regular tune-up. If you want to get in touch with experienced NATE-certified furnace repair technicians in Western New York, you can contact Reimer Home Services.

Electric Or Gas Tankless Water Heater: Which One Should You Buy?

Electric or gas tankless water heater

Deciding between an electric or gas tankless water heater? In this guide, we’ll walk you through the pros and cons of each system.

Most people tend to get confused when it comes to deciding whether to buy an electric or gas tankless water heater. Both the versions have different advantages and disadvantages.

Knowing about the pros and cons is important to make a wise purchase decision for the home. In this blog post, we’ll walk you through the pros and cons of each system.

Call Reimer for tankless water heater installation and service.

The pros and cons of gas tankless water heaters

The gas tankless water heater is run by either gas or propane.  Some models also have both propane and gas option. The reputable brand gas heaters tend to cost about $1,000 to $2000 and more. The venting requirements add to this cost of gas heaters. In some cases, you might also have to install the right size gas line for the heater.

Gas water heaters have a greater flow rate as compared to electric heaters. They can heat up to 8 GPM and more in warmer climates. Another advantage of gas heaters is that they are 10 to 20 percent less costly to operate as compared to electric heaters.

The pros and cons of electric water heaters

Electric tankless water heaters tend to be much less costly as compared to gas tankless heaters. You can find a good model electric heater for about $500 to $800. There are no requirements of venting or another gas line as is the case with gas heaters.

Operating costs of electric water heaters is high. The electric heaters use traditional electricity that is more costly than gas.

Also, in colder climates or where there is a need for high flow rate, a 200 AMP electric service needs to be installed that adds to the cost of the heater. For warmer regions, about 100 to 150 AMP electrical service is required. This is an important consideration when buying an electric heater as not all homes have such electrical service available, and upgrading can substantial add to the cost of installing the heater.

The bottom line: which is the better 0ption for the home?

After reading the above pros and cons of gas and electric tankless heaters, you should be able to make up your mind as to which is the better option of the two for you. If you have a gas line installed in your house that can support gas water heater, the best option is a gas water heater.

Also, a gas water heater is the right choice if the existing infrastructure does not support the electric power heater requirements. In such a case, a gas water heater will be better as not only the installation cost will be less but you will save money due to lower energy bills.

In all other cases, electric tankless water heater is the right choice. There is no need to install additional gas line or venting for the heater. Also, if you area suffer from gas line disruptions such as during extreme frigid months, it’s better that you install gas electric heaters.

Have Reimer help you decide between an electric or gas tankless water heater

For more information on buying the right tankless heater in Buffalo and Western New York area, you can contact Reimer Home Services.